CME Help

mdonan · December 2013

I am installing a CME at a customer site where their current phone system is divided between 2 companies. This CME will have 4 POTS lines for one business and 2 lines for the other. How do I make it where the 2 lines only work from certain phones and the 4 lines work from others? I've been searching Google and can't find what I'm looking for! Any help will be greatly appreciated!

michael.thompson · December 2013

Look up class of restriction configurations in cme.

Outbound calls for company A have one CoR and outbound for company B have the other CoR

Sent from my iPhone

On Dec 4, 2013, at 9:05 AM, mdonan <[email protected]> wrote:

I am installing a CME at a customer site where their current phone system is divided between 2 companies. This CME will have 4 POTS lines for one business and 2 lines for the other. How do I make it where the 2 lines only work from certain phones and the 4 lines work from others? I've been searching Google and can't find what I'm looking for! Any help will be greatly appreciated!

INE - The Industry Leader in CCIE Preparation

http://www.INE.com

Subscription information may be found at:

http://www.ieoc.com/forums/ForumSubscriptions.aspx

Barrick · December 2013

mdonan,

I'm thinking of a few possible solutions to your question. You could use the 'key system' method, where all of the phones for each company would have the respective lines appear on a button, or you could use the 'pbx' method and enforce the separation with COR.

These Cisco docs might help you along:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1026075

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Best of luck!

mdonan · December 2013

Thank you very much Michael and Barrick! It appears CoR is exactly what I need! I was having issues finding the correct words to use while searching was my issue. Again, thank you both!

CME Help

Comments