BR2 Ph1<sccp>

redninja

HI ,  

 

When i place calls from Ph1  to Ph2  -SIP-, it rings but doesnt get to phone to Phone 2. Phone 2 can place calls to ph1, but the hold and end call buttons doesnt work on PH1 and it takes 20 - 30 secs to disconnect. PLs assist

Thanks

Mark Snow

Try the cmds

sh voice register pool 1

and 

sh voice register pool 2

I think you'll find that one of the phones isn't registered. Restart both phones by shutting and no shutting the FE interfaces. BTW anytime you restart the CME router, you must power cycle any SIP Phones. Big limitation in SIP CME 7.0. 

Mark Snow

CCIE #14073 (Voice, Security)

Instructor

Internetwork Expert

[email protected]

http://ine.com

On Dec 10, 2009, at 17:30, redninja <[email protected]> wrote:

HI ,  

 

When i place calls from Ph1  to Ph2  -SIP-, it rings but doesnt get to phone to Phone 2. Phone 2 can place calls to ph1, but the hold and end call buttons doesnt work on PH1 and it takes 20 - 30 secs to disconnect. PLs assist

Thanks

Internetwork Expert - The Industry Leader in CCIE Preparation

http://www.internetworkexpert.com



Subscription information may be found at:

http://www.ieoc.com/forums/ForumSubscriptions.aspx