Registering CME AA dn to Gatekeeper

Anonymous

Let's say I define an AA DN for CME using the statement below.

 

dial-peer voice 17000 voip
 destination-pattern 67000
 session protocol sipv2
 session target ipv4:X.X.X.X
 dtmf-relay sip-notify
 codec g711ulaw
 no vad

 

And the CME is configured with the gateway statement so it registers to a GK. Is there a command to make number 67000 register to the gatekeeper. I see all my ephone-dns have registered but the DNs for voicemail and AA are not registered. Any ideas? Thanks.

Mark Snow

You can only force POTS dial-peers to register to GK's, and then only if the POTS dial-peer has a destination-pattern with a complete pattern (i.e. no wildcard characters). 

HTH

On Dec 4, 2009, at 11:38 PM, [email protected] wrote:

Let's say I define an AA DN for CME using the statement below.

 

dial-peer voice 17000 voip
 destination-pattern 67000
 session protocol sipv2
 session target ipv4:X.X.X.X
 dtmf-relay sip-notify
 codec g711ulaw
 no vad

 

And the CME is configured with the gateway statement so it registers to a GK. Is there a command to make number 67000 register to the gatekeeper. I see all my ephone-dns have registered but the DNs for voicemail and AA are not registered. Any ideas? Thanks.

Internetwork Expert - The Industry Leader in CCIE Preparation
http://www.internetworkexpert.com

Subscription information may be found at:
http://www.ieoc.com/forums/ForumSubscriptions.aspx