R&S troubleshooting > 3560 > startup-config file open failed (Not enough space)
Hello all ,
as the troubeshooting section is foreseen in the ucoming R&S version 4.0 I think this can also go on the IE forum.
Have you ever had the " copy run startup-config " issues on the 3560:
Switch#sh version | include IOS
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE, RELEASE SOFTWARE (fc2)
Switch#
In short , once I enter copy run start I get the following messages on the console:
Switch#copy run startup-config
Destination filename [startup-config]?
startup-config file open failed (Not enough space)
, I tried already the " erase /all nvram: " , " erase startup-config " and it doesn't look like a good solution.
The " dir nvram " is also enabling the crash info process + reloads the switch , the partial output is below :
Switch#dir nvram:
Unexpected exception to CPUvector 2000, PC = DEC1AC
-Traceback= DEC1AC DEADD4 BC6C7C BC3BFC BDB9D0 BDBB34 AB5C88 AD0668 8C1084 8B764C
Writing crashinfo to flash:/crashinfo_ext/crashinfo_ext_5
=== Flushing messages (00:02:05 UTC Mon Mar 1 1993) ===
Buffered messages:
00:00:03: %IFS-3-FS_CREATE_FAIL: Failed to create nvram file system, no NVRAM present
-Traceback= B07480 DE86C4 DEA958 BC68C0 EF4E8 EF67C EFFDC F8E99C F8EA3C B0EDF8 B0F198 8C1084 8B764C
00:00:46: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
00:00:47: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:09: %SYS-5-RESTART: System restarted --
< output omitted >
Thank you for all suggestions on how to resolve the issue on especially if you know why it happens , what cause such things [:O]
stychu