Advertisement of connected interfaces encompassed by the network statment
I have a RIP router advertising networks not included in the network statement. I am not sure why that is?
no passive-interface Serial0/2/0
RIP: sending v2 update to 184.108.40.206 via Serial0/2/0 (220.127.116.11)
RIP: build update entries
18.104.22.168/16 via 0.0.0.0, metric 0, tag 0
22.214.171.124/16 via 0.0.0.0, metric 0, tag 0
OK, then if the 30/8 networks are being advertised, then why is the 126.96.36.199 network not advertised?
cc2-r3#show ip int br | exc down|unass
Interface IP-Address OK? Method Status Protocol
Serial0/2/0 188.8.131.52 YES NVRAM up up
Loopback0 184.108.40.206 YES NVRAM up up
Loopback10 220.127.116.11 YES manual up up
Loopback11 18.104.22.168 YES manual up up
I thought that only connected networks advertised were the ones encompassed in the network statement. What am I not getting?