Section 5.4 Internet Access from MPLS VPNs

Hello All,

I have completed this task. I could see the network of the R8 loopback0 on R7. But the ping is not successful.

Did it work for you?

Rack1R7#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

R [120/1] via, 00:00:24, Vlan67
R [120/1] via, 00:00:24, Vlan67 is subnetted, 1 subnets
R [120/1] via, 00:00:24, Vlan67 is subnetted, 2 subnets
C is directly connected, Loopback0
C is directly connected, Vlan67
R [120/1] via, 00:00:24, Vlan67
R [120/1] via, 00:00:24, Vlan67

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to, timeout is 2 seconds:
Success rate is 0 percent (0/5)

Config on R5:

ip vrf VPN_A
 rd 100:1
 route-target export 100:67
 route-target export 100:42
 route-target import 100:42
 route-target import 100:67

router bgp 100
 no synchronization
 bgp router-id
 bgp log-neighbor-changes
 neighbor remote-as 100
 neighbor update-source Loopback0
 neighbor next-hop-self
 neighbor send-community
 neighbor remote-as 10000
 neighbor route-map SET_COMMUNITY in
 no auto-summary
 address-family vpnv4
 neighbor activate
 neighbor send-community extended
 neighbor next-hop-self
 address-family ipv4 vrf VPN_A
 redistribute static

ip route vrf VPN_A Ethernet0/0 global



Sign In or Register to comment.