can hear nor see the phone ringing.


when i do a test call from the pstn i do not see nor hear the phone ring. this the output from R3

-----------------------------

 

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Progress Ind i = 0x8183 - Origination address is non-ISDN

        Calling Party Number i = 0x0180, '442322425555'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0x81, '22323001'

                Plan:ISDN, Type:Unknown

Jun 16 08:18:09.360: ISDN Se1/0/0:15 Q931: Received SETUP  callref = 0x808C callID = 0x000D switch = primary-net5 interface          = User

Jun 16 08:18:09.384: ISDN Se1/0/0:15 Q931: TX -> CALL_PROC pd = 8  callref = 0x808C

        Channel ID i = 0xA98381

                Exclusive, Channel 1

Jun 16 08:18:09.384: ISDN Se1/0/0:15 Q931: TX -> CONNECT pd = 8  callref = 0x808C

Jun 16 08:18:09.400: ISDN Se1/0/0:15 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x008C

VORack02R3#

Jun 16 08:18:09.404: %ISDN-6-CONNECT: Interface Serial1/0/0:0 is now connected to 442322425555 N/A

Jun 16 08:18:09.404: %ISDN-6-CONNECT: Interface Serial1/0/0:0 is now connected to 442322425555 N/A

 

-----------------------output from the pstn

 

 

 

Jun 16 00:52:39.138: ISDN Se0/0/0:23 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Jun 16 00:52:40.658: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 442322425555

Jun 16 00:52:40.662: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 22323001

Jun 16 00:52:40.662: ISDNJun 16 00:52:39.138: ISDN Se0/0/0:23 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Jun 16 00:52:40.658: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Calling num 442322425555

Jun 16 00:52:40.662: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 22323001

Jun 16 00:52:40.662: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8  callref = 0x0085

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Progress Ind i = 0x8183 - Origination address is non-ISDN

        Calling Party Number i = 0x0180, '442322425555'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0x81, '22323001'

                Plan:ISDN, Type:Unknown

Jun 16 00:52:40.694: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x8085

        Channel ID i = 0xA98381

                Exclusive, Channel 1

Jun 16 00:52:40.694: ISDN Se0/1/0:15 Q931: RX <- CONNECT pd = 8  callref = 0x8085

Jun 16 00:52:40.698: %ISDN-6-CONNECT: Interface Serial0/1/0:0 is now connected to 22323001 N/A

Jun 16 00:52:40.698: ISDN Se0/1/0:15 Q931: TX -> CONNECT_ACK pd = 8  callref = 0x0085

 Se0/1/0:15 Q931: TX -> SETUP pd = 8  callref = 0x0085

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Progress Ind i = 0x8183 - Origination address is non-ISDN

        Calling Party Number i = 0x0180, '442322425555'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0x81, '22323001'

                Plan:ISDN, Type:Unknown

Jun 16 00:52:40.694: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x8085

        Channel ID i = 0xA98381

                Exclusive, Channel 1

Jun 16 00:52:40.694: ISDN Se0/1/0:15 Q931: RX <- CONNECT pd = 8  callref = 0x8085

Jun 16 00:52:40.698: %ISDN-6-CONNECT: Interface Serial0/1/0:0 is now connected to 22323001 N/A

Jun 16 00:52:40.698: ISDN Se0/1/0:15 Q931: TX -> CONNECT_ACK pd = 8  callref = 0x0085

------------------


any suggestions. thanks

Comments

  • Hi,

    Is this any particular lab from IE you are doing?

    Q931 debugs seem to be fine, final part confirms that call is established. As far as I know PSTN is CME. Is R3 CME too or it is under CCM control?

    If it is CME you can just check:

    "sh ephone ringing"

    to confirm if phone is ringing or not. It can be phone issue.

    Cheers,

    Seba

Sign In or Register to comment.