Task 5.4 Multicast Testing

Hi all,

Just a quick note on this one. While I remember using the ip igmp static-group command in a previous lab as the SG stated, this task requires that you disable mroute cache on VLAN 7 using the "no ip mroute-cache" command in order to fulfill bullet two and have SW1 "PROCESS SWITCH" the traffic instead of the default of "FAST SWITCHING". At least that is what I think, unless there is another way to accomplish? Seems to be missing from the SG, but then again what else is new?

See below for details:

RSRack1SW1#sh run int vlan 7
Building configuration...

Current configuration : 133 bytes
!
interface Vlan7
 ip address 191.1.7.7 255.255.255.0
 ip pim dense-mode
 ip igmp static-group 225.25.25.25
 no ip mroute-cache
end

RSRack1SW1#sh ip multi int vlan 7
Vlan7 is up, line protocol is up
  Internet address is 191.1.7.7/24
  Multicast routing: enabled
  Multicast switching: fast

RSRack1SW1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
RSRack1SW1(config)#int vlan 7
RSRack1SW1(config-if)#no ip mroute-cache
RSRack1SW1(config-if)#do sh ip multi int vlan 7
Vlan7 is up, line protocol is up
  Internet address is 191.1.7.7/24
  Multicast routing: enabled
  Multicast switching: process

Comments

Sign In or Register to comment.