LS 1010

Hi.

What type of ATM Switch / Processor (B or C) is needed for MPLS cell mode over ATM?

Any help?

Regards, Celio

Comments

  • i use the ATM Switch/Route Processor C in my lab.

    but there is a serious trick with the ASP-B version :-) and a working config:

    HTH

     Code:

    !
    !LS1010:
    !
    !
    interface ATM0/0/0
    no sh
    !
    interface ATM0/0/1
    atm pvp 63 interface ATM0/1/0 63
    no sh
    !
    !
    !------------------------------------------------
    ! Router R1:
    !
    interface ATM2/0
    no ip address
    no atm ilmi-keepalive
    !
    interface ATM2/0.63 tag-switching
    ip address 10.2.9.1 255.255.255.252
    tag-switching atm control-vc 63 32
    tag-switching atm vpi 63 vci-range 33-65535
    tag-switching ip
    !
    !
    !------------------------------------------------
    !
    ! Router R2 (which is my BB Router):
    !
    !
    interface ATM3/0
    no ip address
    no atm ilmi-keepalive
    !
    interface ATM3/0.63 tag-switching
    ip address 10.2.9.2 255.255.255.252
    tag-switching atm control-vc 63 32
    tag-switching atm vpi 63 vci-range 33-65535
    tag-switching ip
  • Can you paste the config for the ASP-B?
    Is an additional router needed?

    Celio
Sign In or Register to comment.