6.5 VPN Routing Policy

Having Trouble doing a traceroute from R4 to 24.24.24.24 (SW4's Loopback).......the traffic dies after R6 HOP:

R4#traceroute 24.24.24.24 so lo0 numeric
Type escape sequence to abort.
Tracing the route to 24.24.24.24
VRF info: (vrf in name/id, vrf out name/id)
1 128.10.46.6 16 msec 6 msec 10 msec
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *

Anybody else have any issues......here's my recursive lookup:

R4#sh ip cef 24.24.24.24
24.24.24.24/32
nexthop 128.10.46.6 GigabitEthernet0/0.46

R6#sh ip cef vrf SHARED 24.24.24.24
24.24.24.24/32
nexthop 128.10.16.1 GigabitEthernet0/0.16 label 30() 31()

R1#sh ip cef 24.24.24.24
0.0.0.0/0
no route

Can anyone assist?

WB shows this as traceroute......
R4#traceroute 24.24.24.24 source loopback 0
Type escape sequence to abort.
Tracing the route to 24.24.24.24
VRF info: (vrf in name/id, vrf out name/id)
1 128.10.46.6 1 msec 2 msec 0 msec
2 128.10.16.1 [MPLS: Labels 17/33 Exp 0] 15 msec 31 msec 27 msec
3 128.10.233.3 [AS 65024] [MPLS: Label 33 Exp 0] 31 msec 18 msec 24 msec
4 128.10.233.23 [AS 65024] 32 msec 30 msec 29 msec
5 128.10.234.24 [AS 65024] 13 msec * 3 msec

Comments

  • disregard I failed to issue a command properly on the 4.1 DMVPN Section....once I issued that it worked properly

Sign In or Register to comment.