Cisco 1841

Hi there,
I have 3 Cisco 1841 routers and I got another one from eBay to make 4. which I got from eBay has 32CF and 128MB RAM. I upgraded to 64CF and 256MB RAM. It work fine with baud rate 115200. When i changed to baud rate 9600 it will stuck 62720K bytes of ATA CompactFlash (Read/Write). I used same CF to another 1841 it work fine but not in this one. I thought it is issues with CF and RAM with another one still same issues. I post all boot process from rommon mode to normal. Please anybody help me to fix this issues. Thank you.

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c1841 platform with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled

Readonly ROMMON initialized
rommon 1 > confreg 0x2101

You must reset or power cycle for new config to take effect
rommon 2 > boot
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0x2ba5d38
Self decompressing the image : ######################################################################################################################################################################################################################################################################### [OK]

Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0X003AA110 public buffer pools
0X00211000 public particle pools
0X00020000 Crypto module pools
0X000021B8 Onboard USB

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.

Allocating additional 13401731 bytes to IO Memory.
PMem allocated: 245366784 bytes; IOMem allocated: 23068672 bytes

          Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

       cisco Systems, Inc.
       170 West Tasman Drive
       San Jose, California 95134-1706

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 15.1(4)M12a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 04-Oct-16 03:15 by prod_rel_team

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected]

Installed image archive
Cisco 1841 (revision 7.0) with 239616K/22528K bytes of memory.
Processor board ID FTX1119W06R
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)

Sign In or Register to comment.