8.2 congestion managment.....alternate/general discuss

 

...i swear i thought i was reading a post about this task...where sombody did the same thing that i did below...and sombody asked bout why use the deny in access-list....

...anyway the deny matches the www traffic outbound ..leaving 50% BW for www outbound ...

interface Serial1/0
rate-limit output access-group 2699 768000 96000 96000 conform-action transmit exceed-action drop

R6(config-if)#do sh access-l 2699
Extended IP access list 2699
    16 deny tcp host 150.1.4.4 eq www any (7 matches)
    20 permit ip any any (718 matches)

BB1#telnet 150.1.4.4 80
Trying 150.1.4.4, 80 ... Open
get
HTTP/1.1 400 Bad Request
Date: Sun, 03 Mar 2002 08:58:31 GMT
Server: cisco-IOS

R6#sh access-l
Extended IP access list 2699

 16 deny tcp host 150.1.4.4 eq www any (6 matches) <<used this as http server for testing because gives reply back to match acl..to verify logic flow..
20 permit ip any any (104 matches)

Comments

Sign In or Register to comment.