crypto error:IPSEC packet has invalid spi ?

Loaded BGP basic config for RS v5 and got error on R5. this is ATC wb v5:


R5#
%CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=169.254.100.5, prot=50, spi=0x929964D0(2459526352), srcaddr=169.254.100.2, input interface=Ethernet0/1.100

 

R5#
R5#sh ip nhrp
155.1.0.1/32 via 155.1.0.1
   Tunnel0 created 00:05:19, expire 00:04:20
   Type: dynamic, Flags: unique registered used nhop
   NBMA address: 169.254.100.1
155.1.0.2/32
   Tunnel0 created 00:02:07, expire 00:00:57
   Type: incomplete, Flags: negative
   Cache hits: 7
155.1.0.3/32 via 155.1.0.3
   Tunnel0 created 00:05:22, expire 00:04:26
   Type: dynamic, Flags: unique registered used nhop
   NBMA address: 169.254.100.3
155.1.0.4/32 via 155.1.0.4
   Tunnel0 created 00:05:16, expire 00:04:13
   Type: dynamic, Flags: unique registered used nhop
   NBMA address: 169.254.100.4
R5#
R5#sh dmvpn  
Legend: Attrb --> S - Static, D - Dynamic, I - Incomplete
        N - NATed, L - Local, X - No Socket
        # Ent --> Number of NHRP entries with same NBMA peer
        NHS Status: E --> Expecting Replies, R --> Responding, W --> Waiting
        UpDn Time --> Up or Down Time for a Tunnel
==========================================================================

Interface: Tunnel0, IPv4 NHRP Details
Type:Hub, NHRP Peers:3,

 # Ent  Peer NBMA Addr Peer Tunnel Add State  UpDn Tm Attrb
 ----- --------------- --------------- ----- -------- -----
     2 169.254.100.1         155.1.0.1    UP 00:05:22     D
     0 UNKNOWN               155.1.0.2  NHRP    never    IX
     1 169.254.100.3         155.1.0.3    UP 00:05:16     D
     1 169.254.100.4         155.1.0.4    UP 00:05:19     D

R5#
R5#
R5#p  169.254.100.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 169.254.100.2, timeout is 2 seconds:
.!!!!

 

Sign In or Register to comment.