
CME IP phone with Variphy
Hello
I'm trying to setup the CME with Variphy but is not working, this is the error:
Description:
The phone did not authenticate and accept the remote control request from Variphy Insight.
Variphy Insight attempted remote control with the user login: variphy.
The phone's Authentication Server/URL is: http://10.1.130.1/CCMCIP/authenticate.asp
This is the configuration:
!
voice register global
mode cme
source-address 10.1.130.1 port 5060
max-dn 5
max-pool 5
load 7965 SIP45.9-4-2-1S
url authentication http://10.1.130.1/CCMCIP/authenticate.asp
create profile sync 0428905333178154
username variphy privilege 15 password 0 cisco
!
voice register pool 1
id mac 3C0E.236D.4D5B
type 7965
number 1 dn 1
dtmf-relay sip-notify
voice-class codec 1
username 4001 password cisco123
I need help with this!!
Thanks
Comments
Variphy is a remote control program for Cisco Phones - allows remote dialing, answer, etc.
Martin,
Variphy is phone control software that can be used to remotely control phones registered to CUCM or CME. This is same like "PhoneView" software. You can check this
https://www.variphy.com/
http://www.unifiedfx.com/
Hi,
Can you try puting this configuration under Voice register global
service phone webAccess 0
Do they still give you trial if you are going for CCIE?