RMON logging server

Is there a good way to set up, view and log traps from RMON to my PC on home LAB?

 

Comments

  • personally i just use the command "debug ip packet 100 dump" where access-list 100 matches UDP packets sent to SNMP trap port. This way you can see the content of the UDP packet when the router generate a trap. Of course, it's better to run some SNMP manager software on your PC and hook it to the rack. However this is a problem with rental racks, so I usually stick with the ACL "dump" method.

  • I am going over the SNMP/ROMN part of the advanced technologies class and would like to set up a SNMP server. Is there a good freeware server out there you can recommend?

  • <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">






    supship,

     

    'net-snmp' is the best choice for SNMP manager and
    agent open-source software.   You can find it on
    sourceforge.net.

     

    HTH,

     

    Kevin Jutras, CCIE #21784

     





    From: [email protected] [mailto:[email protected]]
    On Behalf Of supship
    Sent: September 16, 2008 3:51
    PM
    To: Kevin Jutras
    Subject: [BULK] Re: [CCIE R&S] RMON
    logging server
    Importance: Low


    I am going over the
    SNMP/ROMN part of the advanced technologies class and would like to set up a
    SNMP server. Is there a good freeware server out there you can
    recommend?




    Internetwork
    Expert - The Industry Leader in CCIE
    Preparation
    http://www.internetworkexpert.com

    Subscription information
    may be found
    at:
    http://www.ieoc.com/forums/ForumSubscriptions.aspx
Sign In or Register to comment.