1.6 Redistribution - Native RIP routes on R3 and R4

The solution states:

Now the same thing but for RIP: we should only see native RIP routes on R3 and R4. All EIGRP routes are preferred via OSPF.

R3 looks good but R4 has the OSPF route between R1 and R3 in its RIP routes table (10.0.13.0/30). Is that meant to be there?

R3#show ip route rip | begin Gateway 

Gateway of last resort is not set

 

      10.0.0.0/8 is variably subnetted, 17 subnets, 2 masks

R        10.0.45.0/30 [120/1] via 10.0.35.2, 00:00:02, GigabitEthernet1.35

R        10.0.46.0/30 [120/1] via 10.0.36.2, 00:00:14, GigabitEthernet1.36

R        10.0.56.0/30 [120/1] via 10.0.36.2, 00:00:14, GigabitEthernet1.36

                      [120/1] via 10.0.35.2, 00:00:02, GigabitEthernet1.35

      192.122.3.0/32 is subnetted, 9 subnets

R        192.122.3.5 [120/1] via 10.0.35.2, 00:00:02, GigabitEthernet1.35

R        192.122.3.6 [120/6] via 10.0.36.2, 00:00:14, GigabitEthernet1.36

 

 

R4#show ip route rip | begin Gateway

Gateway of last resort is not set

 

      10.0.0.0/8 is variably subnetted, 18 subnets, 2 masks

R        10.0.13.0/30 [120/2] via 10.0.46.2, 00:00:04, GigabitEthernet1.46

                      [120/2] via 10.0.45.2, 00:00:02, GigabitEthernet1.45

R        10.0.35.0/30 [120/1] via 10.0.45.2, 00:00:02, GigabitEthernet1.45

R        10.0.36.0/30 [120/1] via 10.0.46.2, 00:00:04, GigabitEthernet1.46

R        10.0.56.0/30 [120/1] via 10.0.46.2, 00:00:04, GigabitEthernet1.46

                      [120/1] via 10.0.45.2, 00:00:02, GigabitEthernet1.45

      192.122.3.0/32 is subnetted, 9 subnets

R        192.122.3.5 [120/1] via 10.0.45.2, 00:00:02, GigabitEthernet1.45

R        192.122.3.6 [120/6] via 10.0.46.2, 00:00:04, GigabitEthernet1.46

Comments

Sign In or Register to comment.