Loss of Ping when using a VRF on the CSR1000v

I noticed ping packet loss on vrf, not first time ib vrf on the CSR1000v . Any ideas ?

R9#ping 172.30.89.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.30.89.8, timeout is 2 seconds:
!!!.!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1507/1777/1940 ms

R9#sh ip cef 172.30.89.8
172.30.89.8/32
attached to GigabitEthernet1.89

not on the other vrf

R2#ping vrf VPN_CCIE 202.4.210.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 202.4.210.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/5 ms

Comments

  • Are you using rack rentals or your own system? 

    It could be that your hypervisor is under very high load. Are your IGPs also flapping?

  • To some degree, there's no causal relationship up to the point that round-trip-time is about as long as the misfortune is announced. In any case, there's typically some connection of long round-treks and bundle misfortune, in light of the number of bounces being crossed that may experience issues. In the meantime, a dreadful part of parcel misfortune occurs in the main jump or two as a result of the awful setup of the host and its quick association condition. UK assignment help

Sign In or Register to comment.