Task 2.2 IGP Features - Other solution?

I don't know if my solution is acceptable or not, but it may just be an interpretation issue on my part. 

The task states:

• Advertise VLAN 33 and R3’s interface connected to SW3into the EIGRP
domain.
• These prefixes should appear as follows throughout the EIGRP domain:
D EX 204.12.X.0 [170/…
D EX 183.X.39.0 [170/…

 

In the solution guide it says to build a route-map referencing the interfaces; however, I did a route-map with a prefix list referencing the subnets.  Is this an acceptable solution?  The reason why I bring it up is the issue of having the route-map there for redistributing routes from a previous task in 2.1 doesn't apply.  Thanks!

Comments

  • In the solution guide it says to build a route-map referencing the interfaces; however, I did a route-map with a prefix list referencing the subnets.  Is this an acceptable solution?

    Emelloul,

    I believe there is no restriction in doing so in this paritcular task. You can use any of the methods if the task doesn't explicitly ask you to be specific to the configuration.

    HTH

Sign In or Register to comment.