CCIEv5 topology

Big Evil

Hey guys - any ides when you will list/show the new INE topolgy for the v5?

Reason for asking is i see most are going virtual for this and i might go the same way if Virl can run the INE lab.

carterw65

I would like to know what the topology will look like too.

Big Evil

I have just seen the 360 one today.

There is one serial link - which as virl does not have this type of interface, this minor section would not be possible, no big deal there.

Ameyadh

Hello All,

Yes, It would be great if we have the v5 Topology as early as possible. As we still have doubt on the number of devices Cisco will have in the actual v5 Lab once its out on 4th June 2014. Once we have the toplogy out, we will atleast be sure, where do we stand in regards to the thought process.

Thank You & Regards,

Ameya Dhage

Big Evil

The 360 has four switches and ten routers (two are BB). I could draw a visio if you like?

Murad

Please draw the toplogy if you can.

Thanks

 

The 360 has four switches and ten routers (two are BB). I could draw a visio if you like?

 

Big Evil

So this is the basic layout i have missed out the serial links as this differs from lab to lab as you know the 360 WB dont use the same pin out end to end. This is the basic one that pretty much remains the same with some added cables between routers 1 - 6 for other labs and serials that appear between R1 and R4 and in some labs R3 and R4.

Murad

Great Big,

Thank you for diagram. It does not look that big as we were scared in the start of V5 announcement due to IOU environment.

This is something practicle and doable in the 5.5 hours time. Where is the 2nd BB in the topology?

Thanks again and lets see what Brians gonna come out with!

 

 

So this is the basic layout i have missed out the serial links as this differs from lab to lab as you know the 360 WB dont use the same pin out end to end. This is the basic one that pretty much remains the same with some added cables between routers 1 - 6 for other labs and serials that appear between R1 and R4 and in some labs R3 and R4.

 

steven.williams

I cant see the whole diagram?

Murad

Right click on the image and do either view image or save image.

HTH

 

I cant see the whole diagram?

 

[email protected]

At CISCO Live they mentioned it would be anything upto 40 devices

 

Big Evil

There is a nice pdf here that has some v5 diagrams

https://www.ciscolivemilan.com/connect/sessionDetail.ww?SESSION_ID=3480

(Session pdf on the right side)

Page 42 onwards.

 

HTH

Murad

Below statement applies only to TS section. They have mentioned ~30 devices in TS. CONF topology will be smaller. roughly 10-15 devices.

HTH

At CISCO Live they mentioned it would be anything upto 40 devices

 

 

Murad

Thanks. Have already gone through it few times [:D]  The CONF section looks interesting though.

 

 

There is a nice pdf here that has some v5 diagrams

https://www.ciscolivemilan.com/connect/sessionDetail.ww?SESSION_ID=3480

(Session pdf on the right side)

Page 42 onwards.

 

HTH

 

joshuaje1

Nice and complicated

Murad

 

Nice and complicated: You think so. I will ask Bruno to revise it [:D]