BGP Add-path and mLDP (LSM) on GNS3

I started testing out some images yesterday for add-path support and found that there is a solid image  that works on GNS3.

There are newer 7200 images, but I do not have access to them. This one is pretty new though:

 

R5#sh ver | i IOS

Cisco IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M), Version 15.2(4)S2 RELEASE SOFTWARE (fc1)

 

router bgp 100

 bgp log-neighbor-changes

!

 address-family ipv4

 bgp additional-path install

  bgp additional-paths select all

  bgp additional-paths send receive

!

  neighbor 5.5.5.5 activate

  neighbor 5.5.5.5 route-reflector-client

  neighbor 5.5.5.5 advertise additional-paths all

 

This platform also supports mLDP as well as BGP based pim-overlay.

 

vrf definition A

 !

 address-family ipv4

  mdt default mpls mldp 1.1.1.1

 

So far this image has been the most feature-rich image that I've been able to run on GNS3. The CSR1000v beats this one anyday, but I am not one of the lucky ones with a lab or a bunch of bare metal to spare...this is working perfectly fine for me as of now =) 

 

cheers,

 

Pablo

 

 

 

 

 

 

 

 

 

Sign In or Register to comment.