TASK 13.21 alternative solution| So why does this work???

I dont need a Static route for the below config:  Why?

I also need to do the cmd sh ip nat nvi translations to see the translation. I dont know what the NVI is? I got it to work after trial and error..

 

Rack1R5#sh run | i static

ip nat source static 155.1.58.8 155.1.45.8

ip nat source static 155.1.45.4 155.1.58.4


------------------------------------



Rack1R5#sr int f0/0

Building configuration...


Current configuration : 131 bytes

!

interface FastEthernet0/0

 ip address 155.1.58.5 255.255.255.0

 ip nat enable

 ip rip advertise 10

 duplex auto

 speed auto

end



----------------------------------------





Rack1R5#sr int s0/1/0

Building configuration...


Current configuration : 102 bytes

!

interface Serial0/1/0

 ip address 155.1.45.5 255.255.255.0

 ip nat enable

 ip rip advertise 10

end


Rack1R5#

--------------------------------------------------------------


Rack1R5#show ip route 155.1.58.4

Routing entry for 155.1.58.0/24

  Known via "connected", distance 0, metric 0 (connected, via interface)

  Redistributing via rip

  Advertised by rip

  Routing Descriptor Blocks:

  * directly connected, via FastEthernet0/0

      Route metric is 0, traffic share count is 1


Rack1R5#







Any clarity Provided will be much appreciated



Tox!

Comments

Sign In or Register to comment.