
Nexus Technology Labs::Classical Ethernet Switching::Port Channels
On the INE DC Racks, it’s not possible to configure the port-channel load-balance on the N5Ks:
N5K7(config)# port-channel load-balance ethernet source-dest-port
% Permission denied
N5K7(config)#
Question: what needs to be modified in the role to make it work ?
role name cisco
rule 99 deny command delete *
rule 98 deny command format *
rule 97 deny command write *
rule 96 deny command mkdir *
rule 95 deny command rmdir *
rule 94 deny command move *
rule 93 deny command reload *
rule 92 deny command copy run start *
rule 91 deny command config t ; no feature telnet
rule 90 deny command config t ; interface mgmt0
rule 89 deny command config t ; feature fex
rule 10 permit read-write
Regards,
Antonio Soares, CCIE #18473 (R&S/SP)
[email protected]
Antonio Soares, CCIE #18473 (RS/SP/DC)
[email protected]
http://www.ccie18473.net
Comments
Hi Antonio,
You need to have a admin role to configure this. Do you have this role? Regarding the issue on INE rack, look here the reply from Brian for the same issue:
http://ieoc.com/forums/t/25906.aspx
Good Luck
Brian was going to work on initialization scripts to have these commands added:
http://ieoc.com/forums/p/25906/205322.aspx#205322
Brian McGahan, CCIE #8593 (R&S/SP/Security), CCDE 2013::13
On May 24, 2013, at 6:32 PM, "Antonio Soares" <[email protected]> wrote:
Thanks. I completly missed that this was already discussed.
Antonio Soares, CCIE #18473 (RS/SP/DC)
[email protected]
http://www.ccie18473.net
Hi! Thanks for your participation. Just find this https://expositoryessays.org. hope it would helps.
This is a very nice one and gives in-depth information. I am really happy with the quality and presentation of the article. I’d really like to appreciate the efforts you get with writing this post. Thanks for sharing.
ccie course in pune
ccie training in pune