VoL III Lab 1

"need tp switch" P4-Line 9 (under TIP)

When enabling OSPF be as specific as possible and do not use the interface-level command to enable OSPF.

 "All of these networks should appear with a subnet mask of /24 in all routing tables"  I dont know if it is better to Create a section named "lab Guidelines" ,and maybe other common requirements  to be under this section.




  • JoeMJoeM ✭✭✭

    With a quick glance, the instructions seem ok.  There are two different requirements.


    specific as possible/not interface-level (example):    

                                router ospf x

                                       network x.x.x.2 area y  

    subnet masks /24 in all routing tables  (fix loopbacks):

                                interface lo0

                                       ip ospf network point-to-point

Sign In or Register to comment.