Task 4.9 R3 Redistribute RIP->EIGRP

On R3 mutual redistribution between EIGRP and RIP is required. If I follow the SG the directly connected routes which participate in RIP will not show up on SW1 (prefixes 145.1.136.0/24 and 145.1.145.0/24. The are also not in the eigrp topology database.

In my point of view the task 4.3 is the problem: the loopback0 on R3 which got selectivly redistributed with a route-map from connected into EIGRP is the problem. It prevents directly connected RIP interfaces on R3 to get redistributed into EIGRP. If I remove the redistribted connected route-map under the eigrp process the RIP routes show up.

 

So in my point of view the route-map in task 4.3 need to get extended to:

 

 

route-map CONNECTED->EIGRP permit 10

 match interface Loopback0 FastEthernet0/1 Multilink35 Multilink34

 

 

Then the direcly connected routes which participate in RIP will show up in EIGRP AS 100.


Could somebody proof this and correct me if I am wrong?

 

Happy study

 

Luke

 

 

Comments

  • My solution on R3 is similar to the solution on R4. There the route-maps gets also extened with match interface looopback0 Ethernet0/0. 

     

    My question is: Why only Ethernet0/0? Is the Multilink to R3 from R4 not also required in the route-map in order to get redistributed into OSPF? It seems not but why?

Sign In or Register to comment.