RSVP Triggered by Lan

Hi,

I have done alot of research on this but have found little info,

 

Is it possable to invoke RSVP via the lan inteface of the HQ r1 and SA r2 lan interfaces.

ipphone ->lan->GW->wan->gw->lan->ipphone

Invoking it on the wan side is simple but I have had no luck getting it to work on the lan side.

this is my working WAN soultion

interface Serial0/0/1:0
 description == Frame Relay
 no ip address
 encapsulation frame-relay
 ip rsvp bandwidth
!

!
interface Serial0/0/1:0.2 point-to-point
 description == FR To Branch2-R3
 ip address 177.0.201.1 255.255.255.0
 snmp trap link-status
 frame-relay interface-dlci 201  
 ip rsvp bandwidth 112

with mtp registered as RSVP agents

 

 

To make this work on the lan do I need to pass the RSVP messages further down the line to the lan interfaces?

Could this be a useable solution?

interface Serial0/0/1:0
 description == Frame Relay
 no ip address
 encapsulation frame-relay
 ip rsvp bandwidth <<<<<<<passes the rsvp messages
!
interface Serial0/0/1:0.2 point-to-point
 description == FR To Branch2-R3
 ip address 177.0.201.1 255.255.255.0
 snmp trap link-status
 frame-relay interface-dlci 201  
 ip rsvp bandwidth  <<<<<removed the 112k of bandwith

interface FastEthernet0/0
 description == To CorpHQ-SW1
 no ip address
 duplex auto
 speed auto
 ip rsvp bandwidth   <<<<<<<passes the rsvp messages

interface FastEthernet0/0.11
 description == Voice VLAN 11
 encapsulation dot1Q 11

 ip address 177.1.11.1 255.255.255.0

ip helper-address 177.1.10.10

ip rsvp bandwidth 112   <<<<<<<<<<<<<added the cac bandwidth back here

 

Has anyone tried this in labs or tested it?

Trent

Comments

Sign In or Register to comment.