Task 5.1

I was just curious if anyone ever got the PIX to work with the virtual http command? It takes the command but doesn't show up in the config anywhere and doesn't show matches when I try to auth against it:

PIX(config)# virtual http 183.1.19.100
PIX(config)# show run virtual
PIX(config)# show run access-list AUTH
access-list AUTH extended permit tcp any any eq 135
access-list AUTH extended permit tcp any host 183.1.19.100 eq www
PIX(config)# show access-list AUTH
access-list AUTH; 2 elements
access-list AUTH line 1 extended permit tcp any any eq 135 (hitcnt=2)
access-list AUTH line 2 extended permit tcp any host 183.1.19.100 eq www (hitcnt
=0)
PIX(config)#

Anyone else have this issue?

Regards,
Nick

Comments

  • hi nick i did the same config and i can see the virtual http command with the show run virtual

    by the way which ios u are using. i am using 7.2.2.19interim release.

    since u have given the lab before can u pls tell exactly which ios they are using on the asa and pix.

    i mean are they using the mainline 7.2.2 or any specific interim-release.

    regards


    sebastan
  • Hey Sebastan,

    Thanks for the info, and it must be a code issue then. The racks I am using are running 7.2(1) code and it doesn't take the command for sure. Glad to know it does work on newer versions though. I don't remember what code version was being used in the lab...I will have to look on Monday. :) Thanks again!

    Regards,
    Nick
Sign In or Register to comment.