Task 5.1 Multicast

Hi Expert

  I am getting a message on R3--R4--R5

R3--> %MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 230

R4--->%MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 230

R5--->%MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 235

Rack1R3#sh ip pim neighbor
PIM Neighbor Table
Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
      S - State Refresh Capable
Neighbor          Interface                Uptime/Expires    Ver   DR
Address                                                            Prio/Mode
154.1.0.4         Tunnel34                 04:25:00/00:01:29 v2    1 / S
154.1.0.5         Tunnel35                 04:25:02/00:01:31 v2    1 / S
154.1.13.1        Serial0/1/1              04:25:40/00:01:35 v2    1 / S

Rack1R3#sh ip pim int

Address          Interface                Ver/   Nbr    Query  DR     DR
                                          Mode   Count  Intvl  Prior
154.1.0.3        Tunnel34                 v2/S   1      30     1      0.0.0.0
154.1.0.3        Tunnel35                 v2/S   1      30     1      0.0.0.0
154.1.3.3        FastEthernet0/1          v2/S   0      30     1      154.1.3.3
154.1.0.3        Serial0/0/0              v2/S   0      30     1      154.1.0.3
154.1.13.3       Serial0/1/1              v2/S   1      30     1      0.0.0.0

Rack1R4#sh ip pim int

Address          Interface                Ver/   Nbr    Query  DR     DR
                                          Mode   Count  Intvl  Prior
154.1.0.4        Tunnel34                 v2/S   1      30     1      0.0.0.0
154.1.45.4       FastEthernet0/1          v2/S   1      30     1      154.1.45.5
154.1.0.4        Serial0/0/0              v2/S   0      30     1      154.1.0.4
Rack1R4#
Rack1R4#
Rack1R4#sh ip pim nei
PIM Neighbor Table
Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
      S - State Refresh Capable
Neighbor          Interface                Uptime/Expires    Ver   DR
Address                                                            Prio/Mode
154.1.0.3         Tunnel34                 04:32:31/00:01:22 v2    1 / S
154.1.45.5        FastEthernet0/1          04:31:18/00:01:34 v2    1 / DR S
Rack1R4#

Please put your comment how can i stop these message ?

thank in adavance

 

Comments

  • Hi,

    Is this real gear or dynamips? Please let us know.

  • hi

     It my own rack

     

  • I am getting a message on R3--R4--R5

    R3--> %MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 230

    R4--->%MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 230

    R5--->%MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this IDB: Serial0/0/0 -Process= "PIM Process", ipl= 0, pid= 235

    Is connection between R3---R4 frame relay ? If it is then have you turned on pseudo broadcast on frame relay multipoint interfaces of R3 and R4 ? If you have not done that then try to apply and obseve the change. 

Sign In or Register to comment.