XR BGPIPV6

 

 

MPLS BACKBONE --R1 (PE) -F0/0-vrf zyx ---------- R2 (CE)

R1-XR  AND R2 - IOX

BGPIPV6 peering between R1 AND R2.

 

router bgp 1

vrf zyx

address-family ipv6 unicast

neighbor XXXX:XXX:X::2

remote-as 2

route-policy PASS in

route-policy PASS out

!

route-policy PASS

pass

!

router static

vrf zyx

address-family ipv6 unicast

XXXX:XXX:XXXX:2/128 f0/0

!

please suggest config is ok or any changes required.

 

Comments

  • looks okay to me..

     

    you saw some problem there?

  • I think you need to have the address-family ipv6 under the neighbor as well, so something like (the output won't necessarily look like below, just wanted to point out that the statement needs to go under the neighbor as well):

     

    router bgp 1

    vrf zyx

    address-family ipv6 unicast

    neighbor XXXX:XXX:X::2

    remote-as 2

    address-family ipv6 unicast

    route-policy PASS in

    route-policy PASS out

    !

    route-policy PASS

    pass

    !

    router static

    vrf zyx

    address-family ipv6 unicast

    XXXX:XXX:XXXX:2/128 f0/0

    !

     

     

    Also, when you are configuring the static route, I believe after the interface name, you need to specify the link-local address of the interface...  something like

    router static

    vrf zyx

    address-family ipv6 unicast

    XXXX:XXX:XXXX:2/128 f0/0 fe80:xxxxx

     

     

    Cheers

     

     

Sign In or Register to comment.