3.6 problem ?

Greets, i'm slightly confused of the task/wording here...

3.6 Reliable Static Routing with Enhanced Object Tracking
1) Remove all previous routing configurations.
2) Configure static routes on R5 so that it has reachability to the Loopback0 networks of R1 and R4 via the Frame Relay network.

 

3)!!!Configure R1 with a static route to R4’s Loopback0 network via the Frame
Relay connection to R5!!!

If we look at solution R1 configured as :

ip route 150.1.4.0 255.255.255.0 155.1.0.4 

?

Should it not be : ip route 150.1.4.0 255.255.255.0 155.1.0.5 since 155.1.0.5 is IP address of that Frame Relay connection to R5 ?

 

Thank you

Comments

Sign In or Register to comment.