3.9 Local policy routing

Guys,

Configured this task with no extra configuration. SG says in local policy routing packets are sourced from loopback interface. It also shows in debug output.

In my case packets were not sourced from lookback rather they were sourcing from their respective outgoing interfaces.

Any comments!!!! 

Comments

  • Can you post your config/ip info and traceroute info here, so I can reply.

    HAPPY STUDY

    [:D]

    Guys,

    Configured this task with no extra configuration. SG says in local policy routing packets are sourced from loopback interface. It also shows in debug output.

    In my case packets were not sourced from lookback rather they were sourcing from their respective outgoing interfaces.

    Any comments!!!! 

  • Hi dcancerian,

    I tried it before on GNS3 with 3725 image and my conclusion was that the router uses the lowest loopback IP to source the traffic. May be this depends on the platform that you are using.

    BTW, are you using GL rack?

  • Hi

    @Halim: Not GL rack for this task. I used 2800 series router (R1) with 12.4(24)T image.

    @nnn : I will paste this config once I perform it again.

     

    Regards,

Sign In or Register to comment.