mocklabv1 questions 1.22 and 1.26

hi experts,

 

i tried to setup the question 1-22 from mock 1, on the example config there is a command under telephony-service call-park system application, i just were not able to type it on the cli, is this a valid cme 7.0 command? is it included on the real exam?

 

now, on the 1.26 configuration example appears the whisper-intercom command under ephone-dn just as the previous question i was not able to type it, is it valid for cme v 7.0? is it included on the real exam?

 

Thanks.

Comments







  • Hi,

     

    I’m not an “expert”, but I can tell what I have experienced.

    I have the same “issues” you have when I try to complete the workboo
    sections you ask about.

    The only way to know what’s in the lab, is to go to the CCIE site, and find
    out what’s on the blueprint.

    The blueprint states an IOS image containing 7.0 releases of CME. There
    was, for a time a newer CME releas (7.1) within the same T train, but it has
    since then been deffered.

    I suspect the workbook/solutions have been made using these now defferd
    releases.

     

    The same is true for the section about Single Number Reach. It is also in
    the work book, but not available on 7.0 (It was introduces in 7.1 but this has
    been withdrwan).

     

    Conclusion: Head over to Cisco.com. Get the blueprin, donwload to latest
    IOS (nondeffered) within that track. That should give you a hint on what to
    expect.

    And just to be on the safe side, Log on to INE racks, and practice those
    functions, just in case...

     

    Lasse

     



     


    From: j4k

    Sent: Thursday, September 30, 2010 4:36 AM


    Subject: [CCIE Voice] mocklabv1 questions 1.22 and
    1.26

     

    hi experts,

     

    i tried to setup the question 1-22 from mock 1, on the example config there
    is a command under telephony-service call-park system application, i just were
    not able to type it on the cli, is this a valid cme 7.0 command? is it included
    on the real exam?

     

    now, on the 1.26 configuration example appears the whisper-intercom command
    under ephone-dn just as the previous question i was not able to type it, is it
    valid for cme v 7.0? is it included on the real exam?

     

    Thanks.




    Internetwork
    Expert - The Industry Leader in CCIE
    Preparation
    http://www.internetworkexpert.com

    Subscription information
    may be found
    at:
    http://www.ieoc.com/forums/ForumSubscriptions.aspx

  • Hi, thanks for you reply, I understand now about the questions pointing to cme v 7.1, I didn't knew workbooks were made with this deferred version, anyway can I assume  the iOS version of the one ine racks is the right one? Or should I upgrade ine racks iOS to test these features?

    By the way is there a new version for the workbooks avoid these features questions? Or is there any list let us know what may not work on the racks?

    Thanks again.


    On Sep 30, 2010, at 2:19 AM, lawedo <[email protected]> wrote:



    Hi,

     

    I’m not an “expert”, but I can tell what I have experienced.

    I have the same “issues” you have when I try to complete the workboo
    sections you ask about.

    The only way to know what’s in the lab, is to go to the CCIE site, and find
    out what’s on the blueprint.

    The blueprint states an IOS image containing 7.0 releases of CME. There
    was, for a time a newer CME releas (7.1) within the same T train, but it has
    since then been deffered.

    I suspect the workbook/solutions have been made using these now defferd
    releases.

     

    The same is true for the section about Single Number Reach. It is also in
    the work book, but not available on 7.0 (It was introduces in 7.1 but this has
    been withdrwan).

     

    Conclusion: Head over to Cisco.com. Get the blueprin, donwload to latest
    IOS (nondeffered) within that track. That should give you a hint on what to
    expect.

    And just to be on the safe side, Log on to INE racks, and practice those
    functions, just in case...

     

    Lasse

     



     


    From: j4k

    Sent: Thursday, September 30, 2010 4:36 AM


    Subject: [CCIE Voice] mocklabv1 questions 1.22 and
    1.26

     

    hi experts,

     

    i tried to setup the question 1-22 from mock 1, on the example config there
    is a command under telephony-service call-park system application, i just were
    not able to type it on the cli, is this a valid cme 7.0 command? is it included
    on the real exam?

     

    now, on the 1.26 configuration example appears the whisper-intercom command
    under ephone-dn just as the previous question i was not able to type it, is it
    valid for cme v 7.0? is it included on the real exam?

     

    Thanks.




    Internetwork
    Expert - The Industry Leader in CCIE
    Preparation
    http://www.internetworkexpert.com

    Subscription information
    may be found
    at:
    http://www.ieoc.com/forums/ForumSubscriptions.aspx



    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx
Sign In or Register to comment.