Dynamips using real switches

Hi,

Im trying to start working through the INE wb I to IV Ver4 but want to use dynamip with real switches.

Before I go through the process to build a Dynam config to replicate the wb hardware i just wanted to know if one already exists.... would save alot of time.

 

Much appreciated.

Comments

  • There is one at http://www.ine.com/dynamips.htm, but it doesn't use real switches. You could use this for a baseline for your .net file, otherwise there might be other candidates here who can share their .net file that uses real switches.

    HTH,  

    Brian McGahan, CCIE #8593 (R&S/SP/Security)
     
    Internetwork Expert, Inc.
    Toll Free: 877-224-8987 x 705
    Outside US: 775-826-4344 x 705
    Online Community: http://www.IEOC.com

    On Aug 30, 2010, at 8:54 AM, "quakesh" <boun[email protected]> wrote:

    Hi,

    Im trying to start working through the INE wb I to IV Ver4 but want to use dynamip with real switches.

    Before I go through the process to build a Dynam config to replicate the wb hardware i just wanted to know if one already exists.... would save alot of time.

     

    Much appreciated.




    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx
  • Hi,

     

    I am running GNS3 and real switches, this makes it easy to simulate the labs without expensive cost associated with the equipment. I am at work now, will post my config and a few notes when I get home.

     

    Regards

     

    Kingsley

  • Thanks Kingsley. Much appreciated.

  • quakesh - I would assume so but, are you using a breakout switch to go from your virtual routers to the external switches?  I am using 2x3560's & 2x3550's for sw1-sw4 then another 3550 to act as my breakout switch.  Only issue with using a 3550 as the breakout switch is that CDP doesn't tunnel correctly between the physical switch and the virtual routers.  If you use a 3560 as the breakout switch, CDP works as expected from what I noticed.  Unfortunately I don't have a spare 3560 to use for my breakout switch so just deal with the CDP issue.  I'd be more than happy to provide any information or configs if you are using a similar setup.

  • Yes I have 2 x 3550 and 2 x 3560 switches connected to the virtual routers all working perfectly but now that Im started to use the INE work book (not the dynamip version) im getting fustrated as the diagram/solutions refer to fast ethernet fa0/0 or S1/1 where as my dynamip config file is refering to e0 and s0/1/0 for example

    Im hoping someone has the INE proper dynam lab config with the interfaces that match the full work books otherwise try and spend sometime this weekend to get it perfected.

  • Use 3700s instead of 2600s/3600s in your dynamips topology, then your interface numbers should match. 3700s are used in our reference .net files as ine.com/dynamips.htm

    HTH,

    Brian McGahan, CCIE #8593 (R&S/SP/Security)
     
    Internetwork Expert, Inc.
    Toll Free: 877-224-8987 x 705
    Outside US: 775-826-4344 x 705
    Online Community: http://www.IEOC.com

    On Aug 31, 2010, at 3:44 PM, "quakesh" <[email protected]> wrote:

    Yes I have 2 x 3550 and 2 x 3560 switches connected to the virtual routers all working perfectly but now that Im started to use the INE work book (not the dynamip version) im getting fustrated as the diagram/solutions refer to fast ethernet fa0/0 or S1/1 where as my dynamip config file is refering to e0 and s0/1/0 for example

    Im hoping someone has the INE proper dynam lab config with the interfaces that match the full work books otherwise try and spend sometime this weekend to get it perfected.




    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx
  • Hi,

     

    As promised here is a copy of my file using GNS3 and 4 real switches.

    My SW1 and SW2 and 3560 while my SW3 and SW4 are 3550

     

    You will need lots of network cards on the computer running the GNS3, I used a few quad nics and some cheap USB NIC adapters.

    Any issues let me know.

     

    Here is the file:

     

    ***********************************************************

     

    autostart = False
    [127.0.0.1:6002]
        workingdir = D:dynamipsworking
        udp = 60200
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
        [[ROUTER R4]]
            model = 3745
            console = 2004
            cnfg = D:dynamipsconfigsR4.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 4
            s0/1 = R5 s0/1
            f0/0 = nio_gen_eth:device
    pf_{c694e058-be56-4127-994f-d34462f9fd48}
            f0/1 = nio_gen_eth:device
    pf_{83b3cc06-a0fd-45ba-b3d1-4689fc6bcb9b}
            x = 47.0
            y = 128.0
            hx = 39.5
            hy = 38.0
        [[ROUTER BB3]]
            model = 3745
            console = 2013
            cnfg = D:dynamipsconfigsBB3.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = BB1 s0/0
            f0/0 = nio_gen_eth:device
    pf_{c875f7f9-fa8f-4ccf-b507-65eb0cd98260}
            slot1 = NM-4T
            x = -303.0
            y = 116.585786438
        [[ROUTER BB2]]
            model = 3745
            console = 2012
            cnfg = D:dynamipsconfigsBB2.cfg
            f0/0 = nio_gen_eth:device
    pf_{2b442952-ebb9-4337-9492-a1aead20d6f3}
            x = -325.0
            y = 260.585786438
        [[ROUTER BB1]]
            model = 3745
            console = 2011
            cnfg = D:dynamipsconfigsBB1.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = BB3 s0/0
            slot1 = NM-4T
            s1/0 = FR1 21
            x = -115.696392769
            y = 152.100505063
            hx = 7.10050506339
            hy = 44.2964645562
    [127.0.0.1:6001]
        workingdir = D:dynamipsworking
        udp = 60100
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
            ghostios = True
        [[ROUTER R5]]
            model = 3745
            console = 2005
            cnfg = D:dynamipsconfigsR5.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 5
            s0/1 = R4 s0/1
            f0/0 = nio_gen_eth:device
    pf_{a7d01bd8-d400-4d24-98f2-28fdb279a0f8}
            f0/1 = nio_gen_eth:device
    pf_{59eccc4b-4e4f-41ed-aa5c-f619b481a5fa}
            x = 167.0
            y = -17.4142135624
            hx = 18.5
            hy = -26.0
        [[ROUTER R2]]
            model = 3745
            console = 2002
            cnfg = D:dynamipsconfigsR2.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 2
            s0/1 = R3 s1/3
            f0/0 = nio_gen_eth:device
    pf_{ac075834-7ba4-4c49-8ac2-ebe985ff4bd3}
            x = -289.0
            y = -136.414213562
        [[ROUTER R3]]
            model = 3745
            console = 2003
            cnfg = D:dynamipsconfigsR3.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            f0/0 = nio_gen_eth:device
    pf_{4eb94e42-c9c3-4540-8820-74cb1b66ec49}
            f0/1 = nio_gen_eth:device
    pf_{904c1a37-8526-47dd-a7b0-6889d028cd83}
            slot1 = NM-4T
            s1/0 = FR1 3
            s1/1 = FR1 13
            s1/2 = R1 s0/1
            s1/3 = R2 s0/1
            x = -48.4142135624
            y = -203.0
        [[FRSW FR1]]
            1:102 = 2:201
            1:103 = 3:301
            1:104 = 4:401
            1:105 = 5:501
            1:113 = 13:311
            2:201 = 1:102
            2:203 = 3:302
            2:204 = 4:402
            2:205 = 5:502
            2:213 = 13:312
            3:301 = 1:103
            3:302 = 2:203
            3:304 = 4:403
            3:305 = 5:503
            4:401 = 1:104
            4:402 = 2:204
            4:403 = 3:304
            4:405 = 5:504
            4:413 = 13:314
            5:501 = 1:105
            5:502 = 2:205
            5:503 = 3:305
            5:504 = 4:405
            5:513 = 13:315
            6:51 = 21:51
            6:100 = 21:100
            6:101 = 21:101
            6:201 = 21:201
            6:301 = 21:301
            6:401 = 21:401
            13:311 = 1:113
            13:312 = 2:213
            13:314 = 4:413
            13:315 = 5:513
            21:51 = 6:51
            21:100 = 6:100
            21:101 = 6:101
            21:201 = 6:201
            21:301 = 6:301
            21:401 = 6:401
            1 = R1 s0/0
            2 = R2 s0/0
            3 = R3 s1/0
            4 = R4 s0/0
            5 = R5 s0/0
            6 = R6 s0/0
            13 = R3 s1/1
            21 = BB1 s1/0
            x = -43.5
            y = -11.5
    [127.0.0.1:6000]
        workingdir = D:dynamipsworking
        udp = 60000
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
        [[3640]]
            image = D:dynamipsimagesc3640-jk9o3s-mz.123-8.T3.bin
            idlepc = 0x604ad000
            sparsemem = True
            chassis = 3640
        [[ROUTER R6]]
            model = 3745
            console = 2006
            cnfg = D:dynamipsconfigsR6.cfg
            wic0/0 = WIC-1T
            s0/0 = FR1 6
            f0/0 = nio_gen_eth:device
    pf_{b2af511b-3fd9-468d-9a9f-96e9b19a7db0}
            f0/1 = nio_gen_eth:device
    pf_{204e7bda-5d0c-4be6-8256-09b4007f236d}
            x = -278.0
            y = -14.5857864377
        [[ROUTER R1]]
            model = 3745
            console = 2001
            cnfg = D:dynamipsconfigsR1.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 1
            s0/1 = R3 s1/2
            f0/0 = nio_gen_eth:device
    pf_{cd9d5809-24d9-4ecd-8530-39b01680a15b}
            x = 122.171572876
            y = -150.414213562
            hx = 21.9142135624
            hy = -25.0
        [[ROUTER TERM_SERV]]
            model = 3640
            console = 2020
            cnfg = D:dynamipsconfigsTERM_SERV.cfg
            slot0 = NM-1FE-TX
            f0/0 = nio_gen_eth:device
    pf_{942728f4-4d1a-4a79-ac11-fd2842c57e7d}
            x = -577.472221513
            y = -244.031529292
            hx = -3.54163056033
            hy = -30.6568542495
    [GNS3-DATA]
        configs = D:dynamipsconfigs
        workdir = D:dynamipsworking
        m11 = 0.353553390593
        m22 = 0.353553390593
        [[Cloud R301]]
            x = 61.5
            y = -279.0
            connections = R3:f0/1:nio_gen_eth:device
    pf_{904c1a37-8526-47dd-a7b0-6889d028cd83}
        [[Cloud R300]]
            x = -271.5
            y = -279.0
            connections = R3:f0/0:nio_gen_eth:device
    pf_{4eb94e42-c9c3-4540-8820-74cb1b66ec49}
        [[Cloud R200]]
            x = -449.5
            y = -247.0
            connections = R2:f0/0:nio_gen_eth:device
    pf_{ac075834-7ba4-4c49-8ac2-ebe985ff4bd3}
        [[Cloud R500]]
            x = 315.5
            y = -121.0
            connections = R5:f0/0:nio_gen_eth:device
    pf_{a7d01bd8-d400-4d24-98f2-28fdb279a0f8}
        [[Cloud BB300]]
            x = -448.5
            y = 167.0
            connections = BB3:f0/0:nio_gen_eth:device
    pf_{c875f7f9-fa8f-4ccf-b507-65eb0cd98260}
        [[Cloud R100]]
            x = 257.5
            y = -245.0
            connections = R1:f0/0:nio_gen_eth:device
    pf_{cd9d5809-24d9-4ecd-8530-39b01680a15b}
        [[Cloud R401]]
            x = -16.5
            y = 295.0
            connections = R4:f0/1:nio_gen_eth:device
    pf_{83b3cc06-a0fd-45ba-b3d1-4689fc6bcb9b}
        [[Cloud BB200]]
            x = -191.5
            y = 306.0
            connections = BB2:f0/0:nio_gen_eth:device
    pf_{2b442952-ebb9-4337-9492-a1aead20d6f3}
        [[Cloud R400]]
            x = 256.5
            y = 131.0
            connections = R4:f0/0:nio_gen_eth:device
    pf_{c694e058-be56-4127-994f-d34462f9fd48}
        [[Cloud C13]]
            x = -623.972221513
            y = -43.4852813742
            connections = TERM_SERV:f0/0:nio_gen_eth:device
    pf_{942728f4-4d1a-4a79-ac11-fd2842c57e7d}
        [[Cloud R600]]
            x = -471.5
            y = -113.0
            connections = R6:f0/0:nio_gen_eth:device
    pf_{b2af511b-3fd9-468d-9a9f-96e9b19a7db0}
        [[Cloud R601]]
            x = -480.5
            y = 29.0
            connections = R6:f0/1:nio_gen_eth:device
    pf_{204e7bda-5d0c-4be6-8256-09b4007f236d}
        [[Cloud R501]]
            x = 356.5
            y = 47.0
            connections = R5:f0/1:nio_gen_eth:device
    pf_{59eccc4b-4e4f-41ed-aa5c-f619b481a5fa}

    ***************************************************************************

     

     

  • Hi Quakesh,

    As promised here is my config file:

    I've also attached the network diagram to give you a better perspective! image

    **********************************************************

    autostart = False
    [127.0.0.1:6002]
        workingdir = D:dynamipsworking
        udp = 60200
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
        [[ROUTER R4]]
            model = 3745
            console = 2004
            cnfg = D:dynamipsconfigsR4.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 4
            s0/1 = R5 s0/1
            f0/0 = nio_gen_eth:device
    pf_{c694e058-be56-4127-994f-d34462f9fd48}
            f0/1 = nio_gen_eth:device
    pf_{83b3cc06-a0fd-45ba-b3d1-4689fc6bcb9b}
            x = 47.0
            y = 128.0
            hx = 39.5
            hy = 38.0
        [[ROUTER BB3]]
            model = 3745
            console = 2013
            cnfg = D:dynamipsconfigsBB3.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = BB1 s0/0
            f0/0 = nio_gen_eth:device
    pf_{c875f7f9-fa8f-4ccf-b507-65eb0cd98260}
            slot1 = NM-4T
            x = -303.0
            y = 116.585786438
        [[ROUTER BB2]]
            model = 3745
            console = 2012
            cnfg = D:dynamipsconfigsBB2.cfg
            f0/0 = nio_gen_eth:device
    pf_{2b442952-ebb9-4337-9492-a1aead20d6f3}
            x = -325.0
            y = 260.585786438
        [[ROUTER BB1]]
            model = 3745
            console = 2011
            cnfg = D:dynamipsconfigsBB1.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = BB3 s0/0
            slot1 = NM-4T
            s1/0 = FR1 21
            x = -115.696392769
            y = 152.100505063
            hx = 7.10050506339
            hy = 44.2964645562
    [127.0.0.1:6001]
        workingdir = D:dynamipsworking
        udp = 60100
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
            ghostios = True
        [[ROUTER R5]]
            model = 3745
            console = 2005
            cnfg = D:dynamipsconfigsR5.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 5
            s0/1 = R4 s0/1
            f0/0 = nio_gen_eth:device
    pf_{a7d01bd8-d400-4d24-98f2-28fdb279a0f8}
            f0/1 = nio_gen_eth:device
    pf_{59eccc4b-4e4f-41ed-aa5c-f619b481a5fa}
            x = 167.0
            y = -17.4142135624
            hx = 18.5
            hy = -26.0
        [[ROUTER R2]]
            model = 3745
            console = 2002
            cnfg = D:dynamipsconfigsR2.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 2
            s0/1 = R3 s1/3
            f0/0 = nio_gen_eth:device
    pf_{ac075834-7ba4-4c49-8ac2-ebe985ff4bd3}
            x = -289.0
            y = -136.414213562
        [[ROUTER R3]]
            model = 3745
            console = 2003
            cnfg = D:dynamipsconfigsR3.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            f0/0 = nio_gen_eth:device
    pf_{4eb94e42-c9c3-4540-8820-74cb1b66ec49}
            f0/1 = nio_gen_eth:device
    pf_{904c1a37-8526-47dd-a7b0-6889d028cd83}
            slot1 = NM-4T
            s1/0 = FR1 3
            s1/1 = FR1 13
            s1/2 = R1 s0/1
            s1/3 = R2 s0/1
            x = -48.4142135624
            y = -203.0
        [[FRSW FR1]]
            1:102 = 2:201
            1:103 = 3:301
            1:104 = 4:401
            1:105 = 5:501
            1:113 = 13:311
            2:201 = 1:102
            2:203 = 3:302
            2:204 = 4:402
            2:205 = 5:502
            2:213 = 13:312
            3:301 = 1:103
            3:302 = 2:203
            3:304 = 4:403
            3:305 = 5:503
            4:401 = 1:104
            4:402 = 2:204
            4:403 = 3:304
            4:405 = 5:504
            4:413 = 13:314
            5:501 = 1:105
            5:502 = 2:205
            5:503 = 3:305
            5:504 = 4:405
            5:513 = 13:315
            6:51 = 21:51
            6:100 = 21:100
            6:101 = 21:101
            6:201 = 21:201
            6:301 = 21:301
            6:401 = 21:401
            13:311 = 1:113
            13:312 = 2:213
            13:314 = 4:413
            13:315 = 5:513
            21:51 = 6:51
            21:100 = 6:100
            21:101 = 6:101
            21:201 = 6:201
            21:301 = 6:301
            21:401 = 6:401
            1 = R1 s0/0
            2 = R2 s0/0
            3 = R3 s1/0
            4 = R4 s0/0
            5 = R5 s0/0
            6 = R6 s0/0
            13 = R3 s1/1
            21 = BB1 s1/0
            x = -43.5
            y = -11.5
    [127.0.0.1:6000]
        workingdir = D:dynamipsworking
        udp = 60000
        [[3745]]
            image = D:dynamipsIMAGESc3745-adventerprisek9-mz.124-15.T6.bin
            ram = 256
            nvram = 251
            idlepc = 0x62b0231c
            sparsemem = True
        [[3640]]
            image = D:dynamipsimagesc3640-jk9o3s-mz.123-8.T3.bin
            idlepc = 0x604ad000
            sparsemem = True
            chassis = 3640
        [[ROUTER R6]]
            model = 3745
            console = 2006
            cnfg = D:dynamipsconfigsR6.cfg
            wic0/0 = WIC-1T
            s0/0 = FR1 6
            f0/0 = nio_gen_eth:device
    pf_{b2af511b-3fd9-468d-9a9f-96e9b19a7db0}
            f0/1 = nio_gen_eth:device
    pf_{204e7bda-5d0c-4be6-8256-09b4007f236d}
            x = -278.0
            y = -14.5857864377
        [[ROUTER R1]]
            model = 3745
            console = 2001
            cnfg = D:dynamipsconfigsR1.cfg
            wic0/0 = WIC-1T
            wic0/1 = WIC-2T
            s0/0 = FR1 1
            s0/1 = R3 s1/2
            f0/0 = nio_gen_eth:device
    pf_{cd9d5809-24d9-4ecd-8530-39b01680a15b}
            x = 122.171572876
            y = -150.414213562
            hx = 21.9142135624
            hy = -25.0
        [[ROUTER TERM_SERV]]
            model = 3640
            console = 2020
            cnfg = D:dynamipsconfigsTERM_SERV.cfg
            slot0 = NM-1FE-TX
            f0/0 = nio_gen_eth:device
    pf_{942728f4-4d1a-4a79-ac11-fd2842c57e7d}
            x = -577.472221513
            y = -244.031529292
            hx = -3.54163056033
            hy = -30.6568542495
    [GNS3-DATA]
        configs = D:dynamipsconfigs
        workdir = D:dynamipsworking
        m11 = 0.353553390593
        m22 = 0.353553390593
        [[Cloud R301]]
            x = 61.5
            y = -279.0
            connections = R3:f0/1:nio_gen_eth:device
    pf_{904c1a37-8526-47dd-a7b0-6889d028cd83}
        [[Cloud R300]]
            x = -271.5
            y = -279.0
            connections = R3:f0/0:nio_gen_eth:device
    pf_{4eb94e42-c9c3-4540-8820-74cb1b66ec49}
        [[Cloud R200]]
            x = -449.5
            y = -247.0
            connections = R2:f0/0:nio_gen_eth:device
    pf_{ac075834-7ba4-4c49-8ac2-ebe985ff4bd3}
        [[Cloud R500]]
            x = 315.5
            y = -121.0
            connections = R5:f0/0:nio_gen_eth:device
    pf_{a7d01bd8-d400-4d24-98f2-28fdb279a0f8}
        [[Cloud BB300]]
            x = -448.5
            y = 167.0
            connections = BB3:f0/0:nio_gen_eth:device
    pf_{c875f7f9-fa8f-4ccf-b507-65eb0cd98260}
        [[Cloud R100]]
            x = 257.5
            y = -245.0
            connections = R1:f0/0:nio_gen_eth:device
    pf_{cd9d5809-24d9-4ecd-8530-39b01680a15b}
        [[Cloud R401]]
            x = -16.5
            y = 295.0
            connections = R4:f0/1:nio_gen_eth:device
    pf_{83b3cc06-a0fd-45ba-b3d1-4689fc6bcb9b}
        [[Cloud BB200]]
            x = -191.5
            y = 306.0
            connections = BB2:f0/0:nio_gen_eth:device
    pf_{2b442952-ebb9-4337-9492-a1aead20d6f3}
        [[Cloud R400]]
            x = 256.5
            y = 131.0
            connections = R4:f0/0:nio_gen_eth:device
    pf_{c694e058-be56-4127-994f-d34462f9fd48}
        [[Cloud C13]]
            x = -623.972221513
            y = -43.4852813742
            connections = TERM_SERV:f0/0:nio_gen_eth:device
    pf_{942728f4-4d1a-4a79-ac11-fd2842c57e7d}
        [[Cloud R600]]
            x = -471.5
            y = -113.0
            connections = R6:f0/0:nio_gen_eth:device
    pf_{b2af511b-3fd9-468d-9a9f-96e9b19a7db0}
        [[Cloud R601]]
            x = -480.5
            y = 29.0
            connections = R6:f0/1:nio_gen_eth:device
    pf_{204e7bda-5d0c-4be6-8256-09b4007f236d}
        [[Cloud R501]]
            x = 356.5
            y = 47.0
            connections = R5:f0/1:nio_gen_eth:device
    pf_{59eccc4b-4e4f-41ed-aa5c-f619b481a5fa}

    ****************************************************************************************************

     

     

    As you can see I have lots of network cards on my GNS3 PC. I use a few quad nics and some cheap USB NIC adapters.

     

    Any questions let me know!!

     

    Good luck

     

    Kingsley

  • Hi, did you get the config. I sent it a hile back and remember the forum moderator had to authorise it somehow. If not let me know.

     

    Rgs

     

    Kingsley












  • I don’t think the forum allows attachments to posts directly. 
    Post it on a file sharing site like 4shared and then post the link to the file.

     

    Brian

     

    From: [email protected]
    [mailto:[email protected]] On Behalf Of JUJEET

    Sent: Monday, September 06, 2010 2:13 AM

    To: Brian McGahan

    Subject: Re: [DYNAMIPS] Dynamips using real switches

     

    Hi, did you get the config. I sent it a hile back and remember the forum
    moderator had to authorise it somehow. If not let me know.

     

    Rgs

     

    Kingsley







    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx





Sign In or Register to comment.