Dynamips/GNS3/Wireshark/WinPCap conflict with Cisco VPN Client

Dynamips/GNS3/Wireshark/WinPCap conflict with Cisco VPN Client

Hello all

Has any one had this problem....I was doing a project (using my laptop) that I needed to use the Cisco VPN Client to get in to the customer managment network ...

While I could get the vpn tunnel up with no problem and telnet to the first device (.3) in the managment network...I could NOT telnet to anything else in the managment network...

Telnet to any of the other devices and the vpn tunnel crashed... I tried everything with no luck...and others on the project were having no problem

I figured something had to be really odd on my laptop that I could get to only one IP via the vpn...somthing in the ip stack... then I thought "I have Dynamips/GNS3 and that has "WinPCap"...

I deinstall WinPCap and bingo!... no more problems

But the thing is, no  WinPCaps, no Dynamips/GNS3, or Wireshark... but I want these tools "Dynamips/GNS3, Wireshark and the Cisco VPN Client" on my laptop at the same time

Anyone else ever have this issue and or know a workarount without deinstall...

Note I run Window 7 64 bit and the Cisco VPN client is the 64 bit version

 

Sign In or Register to comment.