Workbook Vol 1 v5 error/typo

Section 1.38 in the "main" bulleted list refers to SW1 in each bullet.  However in the "answer" section of 1.38 shows SW1 on the 1st bullet, SW2 in the 2nd bullet, and SW4 in 3rd bullet.  I believe that the "answer" section is the correct version.

Comments

  • I'm now worried that I don't understand storm-control because in the "answer" section of 1.38 the shown configuration appears to have the storm-control commands for SW2 f0/6 and SW4 f0/4 backwards.  (i.e. R6 was to be limited to 10Mps and R4 was limited by percentage not vice versa.)

  • <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">






    Since I've seen no replies to this I'm guessing that either I've posted in the wrong place, that the "error" is part of the exercise, or that INE is uber busy (but I've seen them reply to other posts).



    I guess I'm just looking for a sanity check that it is indeed a typo and not some fundamental misunderstanding on my part on how this command works.





    On Sun, 2010-02-07 at 18:14 -0800, daxm wrote:

    I'm now worried that I don't understand storm-control because in the "answer" section of 1.38 the shown configuration appears to have the storm-control commands for SW2 f0/6 and SW4 f0/4 backwards.  (i.e. R6 was to be limited to 10Mps and R4 was limited by percentage not vice versa.)













    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx



Sign In or Register to comment.