IP SLA help

Hi, hoping someone can help answer why I'm getting config discrepencies using my rack.  I'm running the same code as the INE rack, adv enterprise 12.4(24)T on 2811's but the INE configs show:

ip sla monitor 1

  type jitter dest-ipaddr 155.1.45.5 dest-port 16384 codec g729a

  timeout 1000

  frequency 1

 

My configs look like this

ip sla 1

  udp-jitter 155.1.45.5 16384 codec g729a

 

Also, I'm getting errors when trying to set the timeout to 1000, says my timeout can't be less than the threshold of 5000 and I can't set my frequency to 1, I'm seeing an error saying my frequency is less than the timeout.

 

Any help is much appreciated, as I'm having issues doing the validations for the QOS section.

 

Thanks

 

Comments












  • Yeah – some of the labs were composed on a slightly different
    IOS, thus the different syntax.

     

    We are in the process of converting everything over for the
    FINAL version and models that exist on the Graded Labs rack.

     

    From:
    [email protected] [mailto:[email protected]om] On Behalf Of srchang

    Sent: Saturday, January 30, 2010 3:10 PM

    To: [email protected]

    Subject: [IEWB-RS-VOL1-V5] IP SLA help

     

    Hi, hoping someone can help answer why I'm getting config discrepencies
    using my rack.  I'm running the same code as the INE rack, adv enterprise
    12.4(24)T on 2811's but the INE configs show:

    ip sla monitor 1

      type jitter dest-ipaddr 155.1.45.5 dest-port 16384 codec g729a

      timeout 1000

      frequency 1

     

    My configs look like this

    ip sla 1

      udp-jitter 155.1.45.5 16384 codec g729a

     

    Also, I'm getting errors when trying to set the timeout to 1000, says my
    timeout can't be less than the threshold of 5000 and I can't set my frequency
    to 1, I'm seeing an error saying my frequency is less than the timeout.

     

    Any help is much appreciated, as I'm having issues doing the validations for
    the QOS section.

     

    Thanks

     







    Internetwork Expert - The Industry Leader in CCIE Preparation

    http://www.internetworkexpert.com



    Subscription information may be found at:

    http://www.ieoc.com/forums/ForumSubscriptions.aspx





  • Hi Anthony,

    Is there any chance we could see a a brief changelog when a new release of a V1 chapters comes out? It would certainly help students that have gone through all the labs and would be interested to check out anything that's changed since the last release without having to manually diff between versions.

    Thanks!

    Eric

  • im stuck in the same section :(

  • I am having problems here too (QoS WB1 verification).  It would be nice to see this tidied up soon.

     

    ip sla monitor 1
    type jitter dest-ipaddr 155.1.45.5 dest-port 16384 codec g729a
    timeout 1000
    frequency 1
    !
    ip sla monitor schedule 1 life forever start-time now

     

    Should be:

    !

    ip sla 1
    udp-jitter 155.1.45.5 16384 codec g729a
    timeout 5000
    frequency 5000
    exit
    ip sla schedule 1 life forever start-time now

    !

  • The config below works on R6 (IP SLA source) & R5 (IP SLA responder):

     

    R6:

    ip sla 1
    udp-jitter 155.1.45.5 16384 control enable codec g729a
    frequency 30
    exit
    ip sla schedule 1 start-time now life forever
    end
    !
    show ip sla configuration 1
    !
    debug ip sla trace

     

    R5:

    ip sla responder

  • thx EdinburghKev. Good tip!

    that helps a lot else i could have dropped the rest of the exercise as well.

     

Sign In or Register to comment.