Showing related tags and posts accross the entire site.
-
Hey all, my first post so take it easy on me. Is there a way to change the cost of routes coming from a certain ospf neighbor? I've got a router that has indentical routes coming from 2 neighbors with equal cost, and I don't want them to be equal cost. They are coming in on the same interface...
-
I have used it time and time again and it has always worked for me. If you have the system MTU set to 1504 for tunneling, but you have to match and IP MTU of 1500 to be same as the router, I have always just used the 'system mtu routing 1500' on the switch. Rack1R1#sh run int f0/0 Building configuration...
-
Team, I have one ABR between Area 0 and a standard Area 1, and I would like to summarize Area 1 addresses as they are passed into Area 0 on that ABR. There is a particular prefix in Area 1 that is part of the summarized range, but I would like to advertise this particular more-specific prefix into Area...
-
Refer to (lab6 of vol2 v4.1 diagram) and workbook for details. So i've done a couple of these labs some what easily, besides looking up a command here and there. But today I started doing LAB6 most of the switching and bridging were easy. But then i go to usually me favorite and easiest part of any...
Page 1 of 1 (4 items)