in
IEOC CCIE Forums

IEOC - INE's Online Community

Welcome to INE's Online Community - IEOC - a place for CCIE and CCENT candidates to connect, share, and learn. Our Online Community features CCIE forums and discussions for all tracks including Routing & Switching, Voice, Security, Service Provider, Wireless,, and Storage. Through these online communities you can discuss your questions with thousands of your peers, hundreds of CCIE's and INE's own team of world renowned CCIE instructors and authors, Brian Dennis - Quintuple CCIE #2210, Brian McGahan – Triple CCIE #8593, Petr Lapukhov - Quad CCIE #16379, and Mark Snow - Dual CCIE #14073.
Latest post 08-25-2016 12:59 PM by carterw65. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next
  • 08-24-2016 4:12 AM

    Frame-Relay Incoming DLCI

    Is there a way to tell what DLCI another device will send to you without accessing the other devices config?

    • Post Points: 20
  • 08-24-2016 7:23 AM In reply to

    Re: Frame-Relay Incoming DLCI

    On ingress/inbound Frame-Relay frames, the DLCI in the F-R header has nothing to do with the DLCI that the remote device originally applied when transmitting the frame.  The DLCI assigned to that PVC is only locally-significant between you and your local Frame-Relay switch.

    So what you need to ask yourself is, "What DLCI value would my router apply if it were to TRANSMIT a frame to that remote destination?"  Whatever your answer is to that question, that same DLCI value will be seen in frames that you receive FROM that destination.

     

    Here's an analogy,

    Imagine that you are located in Boston, MA and standing in front of a tunnel.  There is a sign at the top of that tunnel (the DLCI value) that reads, "Tunnel-1".  You know that if you enter that tunnel, you will pop-out in Boise, Idaho. When someone is standing in Boise looking at that tunnel (leading back to you, in Boston) it may say, "Tunnel-1"...or it might say, "Tunnel-87".  But it doesn't really matter what THEY see the as the name.  That tunnel only goes to one place...you...in Boston.  So if you are standing in Boston, looking at that tunnel, everything that comes goest into, or comes out of that tunnel (from your perspective) is related to "Tunnel-1"...regardless of what the sign may have been on the other end of that tunnel when they first entered it.

    Hope that helped!

    • Post Points: 20
  • 08-25-2016 10:41 AM In reply to

    Re: Frame-Relay Incoming DLCI

    Thanks Keith. I realize that a DLCI is only locally significant. I guess I worded my question wrong. I was wondering if there was a way to see what DLCI is assigned to MY IP on a neighboring router without actually accessing that router.

    • Post Points: 20
  • 08-25-2016 11:03 AM In reply to

    Re: Frame-Relay Incoming DLCI

    Without accessing the remote router?  Nope...there's no way to do that unless you call up your WAN provider and ask them.

    • Post Points: 20
  • 08-25-2016 12:59 PM In reply to

    Re: Frame-Relay Incoming DLCI

    That's what I figured, but I wanted to check. Thanks for the response!

    • Post Points: 5
Page 1 of 1 (5 items)
IEOC CCIE Forums Internetwork Expert CCIE Training
About IEOC | Terms of Use | RSS | Privacy Policy
© 2010 Internetwork Expert, Inc. All Rights Reserved