in
IEOC CCIE Forums

IEOC - INE's Online Community

Welcome to INE's Online Community - IEOC - a place for CCIE and CCENT candidates to connect, share, and learn. Our Online Community features CCIE forums and discussions for all tracks including Routing & Switching, Voice, Security, Service Provider, Wireless,, and Storage. Through these online communities you can discuss your questions with thousands of your peers, hundreds of CCIE's and INE's own team of world renowned CCIE instructors and authors, Brian Dennis - Quintuple CCIE #2210, Brian McGahan – Triple CCIE #8593, Petr Lapukhov - Quad CCIE #16379, and Mark Snow - Dual CCIE #14073.
Latest post 03-19-2017 8:11 PM by Martinl. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next
  • 03-17-2017 8:47 AM

    Help with ping and subnets

    Hello guys,

    I have a couple of questions.

    Question 1.

    If I have two routers or hosts with thesame ip address but different subnet masks and if iam pinging the ip address which host would  respond? Supposed that the network is connected by layer 3 switches.

    Host A: Ip address 192.168.1.2  255.255.255.0

    default gateway     192.168.1.1  255.255.255.0

     

    Host B: Ip address 192.168.1.2  255.255.255.0

    default gateway     192.168.1.1  255.255.255.0

    If I have a pc in the first network (192.168.1.0/24) and if I ping 192.168.1.2, which of the hosts (A or B) is going to respond? Also what if the PC sending the ping is on a different subnet from host A or host B?

     

    Question2.

    How do we know the mask of the public ip address we are pinging. Could it be a class A, B or C address? Or is tharer a standard?

    Thank you for your responses.

     

     

    • Post Points: 35
  • 03-19-2017 8:05 PM In reply to

    • peety
    • Top 25 Contributor
    • Joined on 02-23-2011
    • Redmond, WA, USA
    • Elite
    • Points 19,715

    Re: Help with ping and subnets

    See the reply I made to your other post. Question 1 doesn't work, as the router won't accept that configuration. Question 2 suggests that you think classful addresses still matter; fact is, they don't. Decades ago, they did matter slightly, but it was really simple: Class A had a first octet of 0-127 or a first bit of 0, Class B had a first octet of 128-191 or a first two bits of 10, Class C had a first octet of 192-223 or a first three bits of 110, Class D had a first octet of 224-239 or a first four bits of 1110, and Class E had a first octet of 240-255 or a first four bits of 1111.

    CCIE R&S #34583

    Now based in Redmond, WA

    • Post Points: 5
  • 03-19-2017 8:11 PM In reply to

    Re: Help with ping and subnets

    Same as your previous post.  If u new or comeback after long break, the system will delay your post untill admin approves it.i guess u posted once and did not see topic right away, then u reposted. 

    • Post Points: 5
Page 1 of 1 (3 items)
IEOC CCIE Forums Internetwork Expert CCIE Training
About IEOC | Terms of Use | RSS | Privacy Policy
© 2010 Internetwork Expert, Inc. All Rights Reserved