in
IEOC CCIE Forums

IEOC - INE's Online Community

Welcome to INE's Online Community - IEOC - a place for CCIE and CCENT candidates to connect, share, and learn. Our Online Community features CCIE forums and discussions for all tracks including Routing & Switching, Voice, Security, Service Provider, Wireless,, and Storage. Through these online communities you can discuss your questions with thousands of your peers, hundreds of CCIE's and INE's own team of world renowned CCIE instructors and authors, Brian Dennis - Quintuple CCIE #2210, Brian McGahan – Triple CCIE #8593, Petr Lapukhov - Quad CCIE #16379, and Mark Snow - Dual CCIE #14073.
Latest post 01-06-2017 6:33 AM by major133. 6 replies.
Page 1 of 1 (7 items)
Sort Posts: Previous Next
  • 01-04-2017 8:07 AM

    something about my Frame Relay topology

    hi everyome

     

    This is frame-relay topology , and this is my configurations:-

     

    R2(config)#frame-relay switching

    interface Serial1/1

    no ip address

    encapsulation frame-relay IETF

    shutdown

    keepalive 15

    serial restart-delay 0

    clock rate 128000

    frame-relay interface-dlci 27

    frame-relay interface-dlci 276

    frame-relay lmi-type q933a

    frame-relay intf-type dce

    end

    but when i type this command :-

    R2(config-if)#frame-relay route 27 interface serial 1/3 25

    can't route on this dlci as a map exists

     

    what whis message referring to?

    • Post Points: 35
  • 01-04-2017 9:11 AM In reply to

    • rriker
    • Top 50 Contributor
    • Joined on 02-21-2013
    • Milwaukee, WI
    • Elite
    • Points 7,050

    Re: something about my Frame Relay topology

    I believe it is saying you configured that mapping already. 


    On Wed, Jan 4, 2017 at 10:11 AM, major133
    <bounce-major133@ieoc.com> wrote:

    hi everyome

     

    This is frame-relay topology , and this is my configurations:-

     

    R2(config)#frame-relay switching

    interface Serial1/1

    no ip address

    encapsulation frame-relay IETF

    shutdown

    keepalive 15

    serial restart-delay 0

    clock rate 128000

    frame-relay interface-dlci 27

    frame-relay interface-dlci 276

    frame-relay lmi-type q933a

    frame-relay intf-type dce

    end

    but when i type this command :-

    R2(config-if)#frame-relay route 27 interface serial 1/3 25

    can't route on this dlci as a map exists

     

    what whis message referring to?




    Internetwork Expert - The Industry Leader in CCIE Preparation
    http://www.internetworkexpert.com

    Rob Riker, CCIE #50693, CCNP Service Provider, VCP5-DCV

    • Post Points: 5
  • 01-04-2017 9:11 AM In reply to

    • rriker
    • Top 50 Contributor
    • Joined on 02-21-2013
    • Milwaukee, WI
    • Elite
    • Points 7,050

    Re: something about my Frame Relay topology

    Show frame-relay map will show you what is configured and working.


    On Wed, Jan 4, 2017 at 10:48 AM, Rob Riker
    <rriker82@yahoo.com> wrote:
    I believe it is saying you configured that mapping already. 


    On Wed, Jan 4, 2017 at 10:11 AM, major133
    <bounce-major133@ieoc.com> wrote:

    hi everyome

     

    This is frame-relay topology , and this is my configurations:-

     

    R2(config)#frame-relay switching

    interface Serial1/1

    no ip address

    encapsulation frame-relay IETF

    shutdown

    keepalive 15

    serial restart-delay 0

    clock rate 128000

    frame-relay interface-dlci 27

    frame-relay interface-dlci 276

    frame-relay lmi-type q933a

    frame-relay intf-type dce

    end

    but when i type this command :-

    R2(config-if)#frame-relay route 27 interface serial 1/3 25

    can't route on this dlci as a map exists

     

    what whis message referring to?




    Internetwork Expert - The Industry Leader in CCIE Preparation
    http://www.internetworkexpert.com

    Rob Riker, CCIE #50693, CCNP Service Provider, VCP5-DCV

    • Post Points: 35
  • 01-05-2017 5:19 PM In reply to

    Re: something about my Frame Relay topology

    tHANKS GREATE SIR / ROB RIKER

    I appretiated your answerinmg 

    • Post Points: 5
  • 01-05-2017 7:05 PM In reply to

    Re: something about my Frame Relay topology

    hi rob

    i want to ask you something

    if serial interface don`t support seconday ip address like keith bogart said, then why that interface accepted my configurations ?

     

    R1(config)#interface serial 1/1

    R1(config-if)#ip address 1.2.3.4 255.255.255.0 secondary

    R1(config-if)#

    s1/1 accepted secondary  interface without any errors

    who is right keith bogart or my ios image????????????

    • Post Points: 20
  • 01-05-2017 8:46 PM In reply to

    • rriker
    • Top 50 Contributor
    • Joined on 02-21-2013
    • Milwaukee, WI
    • Elite
    • Points 7,050

    Re: something about my Frame Relay topology

    I don't believe secondary addressing is supported on anything except Ethernet interfaces.

    Rob Riker, CCIE #50693, CCNP Service Provider, VCP5-DCV

    • Post Points: 20
  • 01-06-2017 6:33 AM In reply to

    Re: something about my Frame Relay topology

    HI Again My Sir /Rob

     

    iam using UNL lab :-

     

    R1#show version 

    Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.5(2)T, DEVELOPMENT TEST SOFTWARE

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 1986-2015 by Cisco Systems, Inc.

    Compiled Thu 26-Mar-15 07:36 by prod_rel_team

     

    ROM: Bootstrap program is Linux

     

    R1 uptime is 0 minutes

    System returned to ROM by reload at 0

    System image file is "unix:/opt/unetlab/addons/iol/bin/L3-ADVENTERPRISEK9-M-15.5-2T.bin"

    Last reload reason: Unknown reason

     

    This product contains cryptographic features and is subject to United

    States and local country laws governing import, export, transfer and

    use. Delivery of Cisco cryptographic products does not imply

    third-party authority to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible for

    compliance with U.S. and local country laws. By using this product you

    agree to comply with applicable laws and regulations. If you are unable

    to comply with U.S. and local laws, return this product immediately.

     

    A summary of U.S. laws governing Cisco cryptographic products may be found at:

    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

     

    If you require further assistance please contact us by sending email to

    export@cisco.com.

     

    Linux Unix (Intel-x86) processor with 874020K bytes of memory.

    Processor board ID 67108868

    4 Ethernet interfaces

    4 Serial interfaces

    1024K bytes of NVRAM.

     

    Configuration register is 0x0

     

    now as you can see that means this unl lab has error when i type secondary ip address on serial interface ?

    what`s your opinion about UNL ?Is He good OR Bad? It`s only Program i can use it  because it`s free 

    • Post Points: 5
Page 1 of 1 (7 items)
IEOC CCIE Forums Internetwork Expert CCIE Training
About IEOC | Terms of Use | RSS | Privacy Policy
© 2010 Internetwork Expert, Inc. All Rights Reserved