in
IEOC CCIE Forums

IEOC - INE's Online Community

Welcome to INE's Online Community - IEOC - a place for CCIE and CCENT candidates to connect, share, and learn. Our Online Community features CCIE forums and discussions for all tracks including Routing & Switching, Voice, Security, Service Provider, Wireless,, and Storage. Through these online communities you can discuss your questions with thousands of your peers, hundreds of CCIE's and INE's own team of world renowned CCIE instructors and authors, Brian Dennis - Quintuple CCIE #2210, Brian McGahan – Triple CCIE #8593, Petr Lapukhov - Quad CCIE #16379, and Mark Snow - Dual CCIE #14073.
Latest post 11-06-2014 10:55 AM by Martinl. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 11-02-2014 9:57 PM

    1.6 Redistribution - EIGRP connected into RIP

    On R4, the subnets on the EIGRP interfaces GigabitEthernet1.45 and GigabitEthernet1.46 can not be redidistributed in the OSPF process due to the lower amin distance. Therefore the solution shows how to add them in the routed map for the redistribution of connected subnets into OSPF. Nothing wrong here.

    On R5 we have a similar case with redistribution of EIGRP routes into RIP. The subnet on GigabitEthernet1.58 is imported through a network statement into EIGRP and then redistributed into RIP. I would have expected that this won't work since the admin distance of EIGRP is lower than RIP. I would have expected that I have to directly redistribute this connected interface in to RIP as well.

    According to the solution it works without and I can confirm but can't explain why. Any help? :)
     

    R5#sh ip route 136.6.58.0  
    Routing entry for 136.6.58.0/24
      Known via "connected", distance 0, metric 0 (connected, via interface)
      Redistributing via rip, eigrp 56
      Advertised by rip
      Routing Descriptor Blocks:
      * directly connected, via GigabitEthernet1.58
          Route metric is 0, traffic share count is 1

    R5#sh ip eigrp topology 136.6.58.0/24
    EIGRP-IPv4 VR(INE_CCIE) Topology Entry for AS(56)/ID(192.122.3.5) for 136.6.58.0/24
      State is Passive, Query origin flag is 1, 1 Successor(s), FD is 655360
      Descriptor Blocks:
      0.0.0.0 (GigabitEthernet1.58), from Connected, Send flag is 0x0
          Composite metric is (655360/0), route is Internal
          Vector metric:
            Minimum bandwidth is 1000000 Kbit
            Total delay is 10000000 picoseconds
            Reliability is 255/255
            Load is 1/255
            Minimum MTU is 1500
            Hop count is 0
            Originating router is 192.122.3.5

    R5#sh ip rip database 136.6.58.0 255.255.255.0
    136.6.58.0/24    redistributed
        [1] via 0.0.0.0,

    R6#sh ip route 136.6.58.5
    Routing entry for 136.6.58.0/24
      Known via "rip", distance 120, metric 1
      Tag 590
      Redistributing via rip
      Last update from 10.0.56.1 on GigabitEthernet1.56, 00:00:25 ago
      Routing Descriptor Blocks:
      * 10.0.56.1, from 10.0.56.1, 00:00:25 ago, via GigabitEthernet1.56
          Route metric is 1, traffic share count is 1
          Route tag 590

    • Post Points: 20
  • 11-05-2014 12:36 AM In reply to

    Re: 1.6 Redistribution - EIGRP connected into RIP

    when u redistribute rotues, all connected (and participating in routing) routes are redistributed automatically.

    since 136.6.58.0/24 (connects R5 and R8) is participating in EIGRP, it will be redistributed by eigrp into rip domian.

    AD matters when router must choose a route and place it into routing table. route must be in routig table to be redistributed.

     

    • Post Points: 20
  • 11-05-2014 9:55 AM In reply to

    Re: 1.6 Redistribution - EIGRP connected into RIP

    You do need to be careful about the connected interfaces. For example, if you have a redistribute connected in OSPF with a route-map specifying a certain interface and then you have a task to mutually redistribute between EIGRP and OSPF on that router, the EIGRP interfaces won't get redistributed into OSPF unless you add them to the route-map.

    CCIE #45404 (R/S)

    • Post Points: 20
  • 11-06-2014 10:55 AM In reply to

    Re: 1.6 Redistribution - EIGRP connected into RIP

    you are right; there is something going on with route-maps and redistribution.  ios bug? 

    • Post Points: 5
Page 1 of 1 (4 items)
IEOC CCIE Forums Internetwork Expert CCIE Training
About IEOC | Terms of Use | RSS | Privacy Policy
© 2010 Internetwork Expert, Inc. All Rights Reserved